Pneumatic strapping tool for steel strap

MAXImum manageability in the smallest space
Get maximum leeway even in small spaces - with MAXI-LAH. Based on MAXI, it combines a pneumatically generated tensioning force of up to 4,000 N with optimum handling characteristics, intuitive operation and ergonomic design.
It works without disturbing hoses; only the connection to the periphery is visible from outside. Joining takes place with seal and notch.
MAXI-LAH can process strap widths of 13, 16 and 19 mm. With 4.2 kg net, it is a real lightweight in its class. The distinctive feature of the MAXI-LAH: The air connection is on the back.
Therefore, it offers the usual handling advantages even under special conditions.

Technische Daten
Antriebsart Spannen Pneumatic
Spannkraft max. 4,000 N (adjustable)
Antriebsart Verschließen Pneumatic
RS 13 ; 16 ; 19
Bandtransportgeschwindigkeit 0,11 m/s
0.36 ft/s
Abmessungen 320 x 145 x 220 mm (L x B x H)
12.6 x 5.7 x 8.7 in (L x W x H)
Gewicht 4,5 kg
9.9 lb
Luftdruck max. 4,0 bar Fließdruck (für 13 mm Band)
max. 5,0 bar Fließdruck (für 16 mm Band)
max. 6,0 bar Fließdruck (für 19 mm Band)
max. 4.0 bar flow pressure (for 1/2 " strap)
max. 5.0 bar flow pressure (for 5/8 " strap)
max. 6.0 bar flow pressure (for 3/4 " strap)
(beim Spannen)
5 Nl / s
(beim Verschließen)
4 Nl / s
Anschlussquerschnitt G 1/4 "
Handarm Vibration information currently not available
Geräuschpegel 76 dB (A)
Bandtyp Steel strap
Band Automatenband
Bandbreite 13, 16, 19 mm
1/2" ; 5/8" ; 3/4"
Banddicke 0,40 - 0,60 mm (für Automatenband)
0,40 - 0,63 mm (für MEGABAND®)
0.016 - 0.024 in (for Automatenband)
0.016 - 0.025 in (for MEGABAND®)
Verschlussart Seal-joint (single notch)
(abhängig von der Bandqualität, Bandabmessung)
up to approx. 50% of the strap breaking load
Strapping of round and flat packages (e.g. sectional steel, bundles, pipes, coils, etc.) for stationary use, with compressed-air supply (LAH) rear.