Combined strapping tool for steel strap

Combined forces
Each strapping process consists of two steps. Tensioning and joining the strap is possible completely manually as well as entirely electrically or pneumatically.
The HPE-L combines muscle power and pneumatics. The strap tension of up to 7,000 N is generated pneumatically while joining is done manually.
In principle, the HPE-L offers the same advantages as the HKE series but expands them by greater user-friendliness and a consistently high tensioning force thanks to pneumatic drive.
This saves valuable energy. It also saves running costs as seals are not needed thanks to the proven TITAN joint with three notches.

Technische Daten
Antriebsart Spannen Pneumatic
Spannkraft up to 7,000 N
Antriebsart Verschließen Manually
Bandtransportgeschwindigkeit 0,15 m/s
0.5 ft/s
Abmessungen 360 x 115 x 160 mm (L x B x H)
14.2 x 4.5 x 6.3 in (L x W x H)
Gewicht 5,5 kg
12.1 lb
Luftdruck max. 6 bar flow pressure
(beim Spannen)
0,36 m³ / min.
12.7 ft³ / min.
Anschlussquerschnitt information currently not available
Handarm Vibration < 2.5 m/s²
Geräuschpegel 78 dB (A)
Bandtyp Steel strap
Band Automatenband
Bandbreite 13, 16, 19 mm
1/2" ; 5/8" ; 3/4"
Banddicke 0,50 - 0,80 mm (für Automatenband, Megaflex)
0,50 - 0,63 mm (für MEGABAND®)
0.02 - 0.031 in (for Automatenband, Megaflex)
0.02 - 0.025 in (for MEGABAND®)
Verschlussart Sealless-joint
(abhängig von der Bandqualität, Bandabmessung)
up to approx. 75% of the strap breaking load
Gerades / Flächiges
150 mm
5.9 in
Strapping of flat packages (e.g. palletized goods) for stationary use.